AirSense™ 10 AutoSet™ For Her CPAP Machine with HumidAir™ Heated Humidifier
Updated: Feb 1, 2018
The AirSense™ 10 AutoSet for Her CPAP Machine with HumidAir™ Heated Humidifier is the first CPAP machine truly designed for women on the outside AND inside. An advanced algorithm designed for female breathing patterns helps make therapy as comfortable and effective as possible. The sleek design features an integrated humidifier making it 23% lighter than former models from ResMed.
Manufactured by ResMed.
The AirSense™ 10 AutoSet for Her CPAP Machine with HumidAir™ Heated Humidifier is designed with women in mind. From the ivy leaf design to its special algorithm, this machine is a woman's dream. This is a auto-adjusting CPAP machine that auto-adjusts to the optimum pressure on a breath by breath basis.
For Her Algorithm
HumidAir™ Heated Humidifier
OPTIONAL ClimateLineAir™ Heated Tube
Color LCD Display
Integrated Light Sensor
Expiratory Pressure Relief (EPR™)
For Her Algorithm
One of the most innovative features of the AirSense™ 10 AutoSet for Her is the algorithm developed for women and the manner in which OSA affects them. A standard algorithm responds after 3 flow limited breaths and will move up by as much as 3 cmwp. The For Her algorithm responds after just 1 flow limited breath and will move up by as much as 2.5 cmwp. If needed the algorithm setting can be changed to the standard AutoSetAutoSet™ algorithm version.
Also available from ResMed is the AirSense™ 10 AutoSet CPAP Machine with HumidAir™ Heated Humidifier. It offers only the standard AutoSet™ for auto-adjusting the delivered pressure in a black machine. All other features are the same as the For Her version.
HumidAir™ Heated Humidifier
The AirSense™ 10 AutoAdjust for Her CPAP Machine has an internal heating plate. The water chamber is attached directly to the machine for a minimal footprint. The humidifier can be set to 9 different settings: off, and 1 through 8 with 1 being the lowest level of humidification, and 8 being the highest.
Enjoy enhanced humidification by adding the OPTIONAL ClimateLineAir integrated heated tube. The Auto Climate Control mode will consider the room temperature and adjust the level of humidification delivered to the mask.
For added convenience the AirSense™ 10 AutoSet for Her CPAP features SmartStart™ technology. Simply put on the mask and start breathing and the machine will begin therapy. Similarly, when the mask is taken off, the machine will register the machine is no longer in use and turn off.
Color LCD Display with Integrated Light Sensor
The LCD display of the AirSense™ 10 AutoSet for Her features vibrant colors to help clearly identify different stages of therapy. A blank circle fills with green as therapy pressure ramps up. Green and red faces indicate proper or poor mask fit and are also used to indicate if the humidifier is working properly.
The machine also features an integrated light sensor which allows the screen to adjust brightness automatically when ambient light changes. If a restroom break is needed in the middle of the night, the screen won't blind with brightness, and in the morning it won't be too dim to read how therapy went. In addition, the screen will automatically turn off after a short time to avoid extra light in a dark room.
Expiratory Pressure Relief (EPR™)
Now a mainstay on ResMed machines, EPR™ is intended to make therapy more comfortable. Breathing out against full prescribed pressure can sometimes be uncomfortable. EPR™ steps in and helps by lowering the pressure by a set amount on exhalation.
Autoset Response is a comfort feature that can be enabled to provide more gentle pressure increases. If the machine detects a pressure increase is needed, the response feature will ease into the increased pressure to help those with lower pressure tolerance.
The AirSense™ 10 AutoSet for Her will display the following advanced therapy data on the machine display through the "More Info" option in the "Sleep Report" menu:
Events Per Hour
SpecificationsThis Product Includes...
Auto-Adjusting CPAP Machine
Built-In HumidAire Heated Humidifier
Standard Humidifier Chamber
SlimLine Tubing - 15mm Diameter
Power Supply and Cord
1- Standard Filter (Installed)
SD Card - Inserted in Machine
Weight - Machine with Water Chamber: 2.75 lbs (44 oz.)
Dimensions - Machine with Water Chamber: 10.04 in L x 4.57 in W x 5.91 in H
Weight - Standard Chamber: .54 lb
Weight - Machine with Side Cover (Without Water Chamber): Approx. 2.452 lbs
Dimensions - Machine with Side Cover (Without Water Chamber): Approx. 8 in L x 4.57 in W x 5.91 in H
Dimensions - Travel Bag: 13.24 in L x 10 in W x 5 in H
Weight - Travel Bag Alone: 1.18 lb
Weight - Machine with Humidifier; Power Supply and Cord; SlimLine Tube; Travel Bag:Approximately 5.1 lbs
Weight - Machine with Humidifier; Power Supply and Cord; OPTIONAL ClimateLineAir Tube; Travel Bag: Approximately 5.25 lbs
Sound Level: 26.6 dBA
Water Chamber Capacity: 380 mL
Weight - 90W Power Supply, Cord and Plug: 1.29 lb
Dimensions - 90W Power Supply Only (Not including Cor or Plug): 5 1/2 in x 1 7/8 in x 1 1/4 in
AC Input Range - 90W Power Supply: 100 - 240V, 50 - 60Hz, 1.0 - 1.5A, Class II
DC Output - 90 W Power Supply: 24V --- 3.75A
Typical Power Consumption: 53W (57VA)
Peak Power Consumption: 104W (108VA)
Operating Pressure: 4 - 20 cm H2O (0.2 cm increments)
Length - SlimLine Tubing: 6 feet
Materials - SlimLine Tubing: Flexible Plastic
Materials - Water Chamber: Injection Molded Plastic, Stainless Steel, Silicone Seal
Materials - Standard Filter: Polyester non-woven fiber
Temperature Range - Optional ClimateLineAir™ Heated Tube: 60 - 80° F (16 - 30° C)
Operating Temperature: 41° F - 95° F (5° C - 35° C)
Storage and Transport Temperature: -4° F - 140° F (-20° C - 60° C)
Operating Humidity: 10% - 95% Relative Humidity, non-condensing
Storage and Transport Humidity: 5% - 95% relative Humidity, non-condensing
Operating Altitude: Sea Level - 8500 Feet (2,591 M); Air pressure range 1013 hPa - 738 hPa
Maximum Temperature - Heating Plate: 154° F (68° C)
Maximum Temperature - Cut Out: 165° F (74° C)
Maximum Gas Temperature: Less than or Equal to 106° F (? 41° C)
IEC 60601-1:2005 Classification: Class II (Double Insulation), Type BF, Ingress protection IP22
Machine Warranty: 2 Years
Patient Weight: Greater than 66 lbs
The chamber should be taken apart and hand washed weekly using warm water and a mild detergent. It should be rinsed well and allowed to air dry out of direct sunlight before reassembling. The chamber should not be washed in a dishwasher or washing machine. The SlimLine hose should be washed in the same manner and allowed to completely dry out of direct sunlight before reattaching to the machine and mask.
Required Settings: This machine does not have required settings.
The user manual included with this machine can be viewed and downloaded here: AirSense 10 User Guide.
FAA Compliance Letter: To view the FAA compliance letter for the AirSense™ 10 AutoSet For Her CPAP Machine with HumidAir™ Heated Humidifier.
Do not fill the water chamber past the max fill line as this could result in water entering and damaging the device. Allow the water chamber to cool for ten minutes after use before handling as it could be too hot to the touch. The machine will display a blue snowflake in the upper right of the screen while cooling is taking place. The water chamber should be washed weekly using warm water and a mild detergent, rinsed well, and allowed to dry out of direct sunlight. The standard water chamber included is not dishwasher safe and should only be hand washed. To view a dishwasher safe chamber, see the Dishwasher Safe Water Chamber for AirSense™ 10 Humidair™ Heated Humidifier.
If the integrated heated humidifier is not being used, purchase the Side Cover for AirSense™ 10, AirStart™ 10, and AirCurve™ 10 Machines separately in order to enclose the machine opening. The side cover is not needed to operate the machine.
How to Determine if the Water Chamber is Dishwasher Safe?
AirSense™ 10 and AirCurve™ 10 machines denote the water chamber model with an "S" or "C" label. Look directly above the maximum fill line located on the side of the chamber to find the word HumidAir™ and the corresponding letter embossed into the tank.
If the water chamber is dishwasher safe, the chamber will appear as HumidAir C, which represents a cleanable tank.
If the water chamber is the standard model, the chamber will appear as HumidAir S, which represents a standard tank.
Either a 15mm (Slim) hose or a 22mm (Standard) hose may be used with the AirSense™ 10 line of machines. The machine must be changed to the proper setting to ensure accurate therapy pressure. Also available is the OPTIONAL ClimateLineAir™ heated hose which will instantly activate the Auto Climate Control feature when connected to the machine.
A SlimLine™ hose is included with the purchase of the AirSense™ AutoSet for Her CPAP machine. The hose is found in the interior, zipped compartment of the travel bag. The nook is located just below the floral print pockets providing safe keeping for the hose during travel.
The AirSense™ 10 CPAP machines feature AutoRamp™ technology. Unlike traditional ramp features that will slowly ramp up pressure over a set amount of time, AutoRamp™ will stay at the set starting pressure until it senses the user is asleep. The default starting pressure is 4 cm H2O. Once the user is asleep, it will then start ramping 1 cm H2O per minute until it reaches the full prescribed pressure. AutoRamp™ will always reach the full prescribed pressure within 30 minutes, so even if not asleep, the machine will start to ramp in 1 cm H2O increments every minute to reach the full prescribed pressure at the 30 minute mark. Additionally, the AirSense 10 CPAP machines can be set to a traditional ramp if needed, or turned off altogether.
Per the manufacturer, the SmartStart™ technology may not function as intended when used with a nasal pillow mask and a pressure setting of 7 cm H2O or less. If the feature does not appear to be functioning, this comfort feature can be turned off. Please refer to the User Guide for more information.
Airplane Mode Tips
Please note, the AirSense Line of machines include a built in wireless modem giving the machine data transfer capabilities over a wireless cellular network. The wireless modem will automatically connect if the machine's "Airplane Mode" is turned to "Off". For privacy concerns, will ship the machine with airplane mode "On" so that sleep data information will not be transmitted unintentionally over the wireless network. If Airplane mode is turned "Off", sleep data could be transmitted to ResMed's servers.
PLEASE NOTE: The AirView data transfer system is for use only in North America. It cannot be used to transmit data wirelessly outside of North America. The SD card that accompanies the machine can be used to store and share data.
SD Card Location
The included SD card comes installed in the machine ready to use. While looking at the machine with the display facing forward, the SD card is located under the upper flap with the blue "SD" logo on the left side of the machine.
Features Summary for the AirSense 10 Line of Machines
ResMed AirSense 10 CPAP Machine with HumidAir™ Heated Humidifier: Single pressure CPAP machine with included HumidAir Humidifier. Can be set only in CPAP mode and CPAP mode with EPR. Compliance sleep data along with AHI. Only available in black.
AirSense 10 Elite CPAP Machine with HumidAir™ Heated Humidifier: Single pressure CPAP machine with included HumidAir Humidifier. Can be set only in CPAP mode and CPAP mode with EPR. Compliance sleep data plus advanced data on the screen. Only available in black.
AirSense 10 AutoSet CPAP Machine with HumidAir™ Heated Humidifier: Auto-adjusting CPAP machine with standard AutoSet algorithm with included HumidAir Humidifier. Can be set in Auto mode with standard AutoSet algorithm, Auto mode with standard AutoSet algorithm with EPR, CPAP mode and CPAP mode with EPR. Only the standard AutoSet algorithm is available on this machine. Compliance sleep data plus advanced data on the screen. Only available in black.
AirSense 10 AutoSet for Her CPAP Machine with HumidAir™ Heated Humidifier: Auto-adjusting CPAP machine with standard AutoSet algorithm with included HumidAir Humidifier. Can be set in AutoSet For Her algorithm OR standard AutoSet algorithm , Auto mode, Auto mode with EPR, CPAP mode and CPAP mode with EPR. Compliance sleep data plus advanced data on the screen. Only available in white.